HoverBots1.1.4
Publisher Description
ABOUT ROBOTICS: SMART MACHINES - HOVERBOTS
The HoverBots kit allows you to build and program six amazing robots that balance on two wheels! With this app installed on a supported Bluetooth-enabled device, you can remotely control, program, and adjust the balance settings of your robots.
HOW TO USE:
Position the balancing robot model with its wheels on a smooth floor in an open area.
Turn on the switch and hold the model upright with its weight on the floor until you feel its motors turning. Then the model will start balancing on its own.
Open the app on your device.
Establish a Bluetooth connection between the app and the robotic base unit.
There are three different modes: Remote Control, Balance Settings, and Programming. Refer to the product manual for more details.
*****
Questions or suggestions for improvements:
Mail to apps@kosmos.de
We are looking forward to your feedback!
*****
Version History - GUI fine-tune on Remote Control, Balancing Settings and Programming Mode.
- PID parameters will be downloaded to the chassis when leaving Balancing Settings
- Safety mechanisms for some unreasonable conditions of program blocks in Programming Mode. 1.1.4 12/12/2019 GUI improvement on Programming Mode 1.1.2 11/19/2019 What's new :
- Bugfix on the issue of balancing crash in Balancing-Robot Programming Mode
- Bugfix on the blank program-block at the runtime in Gyroscope-sensor Programming Mode
- Bugfix on the audio delay/repeat in programming modes 1.1.1 11/13/2019 - GUI improvement on the font size
- Improvement on the security
- Improvement on the compatibility on audio-playback
- Improvement on the performance of PID parameter library page switching
- Improvement on the model program management
- Bugfix on model program running
- Bugfix on the GUI of Programming Mode and RC Mode 1.0.8 10/21/2019 1.0.5 10/02/2019
About HoverBots
The company that develops HoverBots is Franckh-Kosmos Verlags GmbH & Co. KG. The latest version released by its developer is 1.1.4.
To install HoverBots on your iOS device, just click the green Continue To App button above to start the installation process. The app is listed on our website since 2026-10-15 and was downloaded 4 times. We have already checked if the download link is safe, however for your own protection we recommend that you scan the downloaded app with your antivirus. Your antivirus may detect the HoverBots as malware if the download link is broken.
How to install HoverBots on your iOS device:
- Click on the Continue To App button on our website. This will redirect you to the App Store.
- Once the HoverBots is shown in the iTunes listing of your iOS device, you can start its download and installation. Tap on the GET button to the right of the app to start downloading it.
- If you are not logged-in the iOS appstore app, you'll be prompted for your your Apple ID and/or password.
- After HoverBots is downloaded, you'll see an INSTALL button to the right. Tap on it to start the actual installation of the iOS app.
- Once installation is finished you can tap on the OPEN button to start it. Its icon will also be added to your device home screen.
Program Details
System requirements
Download information
Pricing
Version History
version 1.1.4
posted on 2026-10-15
Version History - GUI fine-tune on Remote Control, Balancing Settings and Programming Mode.
- PID parameters will be downloaded to the chassis when leaving Balancing Settings
- Safety mechanisms for some unreasonable conditions of program blocks in Programming Mode. 1.1.4 12/12/2019 GUI improvement on Programming Mode 1.1.2 11/19/2019 What's new :
- Bugfix on the issue of balancing crash in Balancing-Robot Programming Mode
- Bugfix on the blank program-block at the runtime in Gyroscope-sensor Programming Mode
- Bugfix on the audio delay/repeat in programming modes 1.1.1 11/13/2019 - GUI improvement on the font size
- Improvement on the security
- Improvement on the compatibility on audio-playback
- Improvement on the performance of PID parameter library page switching
- Improvement on the model program management
- Bugfix on model program running
- Bugfix on the GUI of Programming Mode and RC Mode 1.0.8 10/21/2019 1.0.5 10/02/2019
version 1.1.4
posted on 2019-12-12
- GUI fine-tune on Remote Control, Balancing Settings and Programming Mode.
- PID parameters will be downloaded to the chassis when leaving Balancing Settings
- Safety mechanisms for some unreasonable conditions of program blocks in Programming Mode.
version 1.1.4
posted on 2019-12-12
Dec 12, 2019 Version 1.1.4
- GUI fine-tune on Remote Control, Balancing Settings and Programming Mode.
- PID parameters will be downloaded to the chassis when leaving Balancing Settings
- Safety mechanisms for some unreasonable conditions of program blocks in Programming Mode.
